Robin King Grey Wood Canopy Bed | Poster

Assemble Bed Frame: Step 1: Attach side rails to the headboard and footboard. Align the side rails with the pre-drilled holes on the headboard and footboard. Insert the threaded bolts through the holes, add half moon washers and hex nuts, and tighten securely with the Allen key. Step 2: Install slat roll and supports. Place slat support legs into the slat roll. Position the slat roll on the bed frame. Attach center slat supports to the slat roll. Assemble Canopy Frame: Step 3: Connect the canopy frame. Attach the four canopy frame pieces to the top corners of the headboard and footboard. Use threaded bolts, half moon washers, and hex nuts to secure the canopy frame. Tighten all connections with the Allen key. Step 4: Install canopy support rails. Attach the four canopy support rails between the canopy frame pieces. Secure the support rails with threaded bolts, half moon washers, and hex nuts. Ensure all bolts are tightened securely. Final Adjustments: Step 5: Position the bed. Place the bed in its final position. Adjust the levelers under each support leg to ensure the bed is level and stable. Maintenance Instructions: Periodically check and tighten all fittings. Remove the mattress before moving the bed. Lift the bed rather than dragging it to avoid damaging the frame. Readjust the levelers after moving the bed. Completion: Assembly is complete when all parts are securely fastened, and the bed is level and stable.

Dust frequently with a clean, damp, lint-free cloth. Frequent dusting will remove abrasive build-up which can damage a finish over time. Occasionally use a light application of a high quality furniture polish to enhance the beauty of the finish. Avoid using oily polishes or waxes. Avoid exposing your furniture to strong sunlight. Prolonged exposure to direct sunlight can fade the finish of your furniture. Do not expose your furniture to any liquids. Never allow water to sit on your furniture. Alcohol, nail polish and perfume are also dangerous, as they can dissolve the furniture finish on contact and may require professional repairs.