Huxley Grey Queen Wood & Button Tufted Upholstered Platform Storage Bed | Drawers

ATTACH ONE SIDE RAIL TO THE HEADBOARD USING ONE M8X20 ALLEN BOLT, M8 SPRING WASHER AND M8 FLAT WASHER THROUGH THE METAL 'L' BRACKET. USE ONE M8X50 ALLEN BOLT , M8 SPRING AND M8 FLAT WASHER THROUGH THE WOODEN SIDE RAIL SUPPORT. DO NOT TIGHTEN THE BOLTS COMPLETELY.PULLING OUT THE FOOTBOARD STORAGE DRAWER , ATTACH THE FOOTBOARD FRAME TO THE SIDE RAIL USING FOUR M6X50 ALLEN BOLTS , M6 SPRING WASHERS AND M6 FLAT WASHERS . DO NOT TIGHTEN THE BOLTS COMPLETELY. REPEAT STEP ONE FOR THE SECOND SIDE RAIL. TIGHTEN ALL ALLEN BOLTS FROM STEP 1 AND 2 COMPLETELY WITH THE ALLEN KEY. ATTACH THE SUPPORT LEGS TO THE SUPPORT SLAT. CONNECT THE SUPPORT SLAT ASSEMBLY TO THE HEADBOARD AND FOOTBOARD SUPPORT SLAT CLEAT USING TWO WOOD SCREWS. PLACE AND CONNECT TH SLAT ROLL TO THE BED WITH THE PROVIDED WOOD SCREWS. INSTRUCTIONS FOR ADJUSTING LEVELER POSITION THE BED IN YOUR SPACE AND LOCATE THE LEVELER UNDER EACH SUPPORT LEG. TURN THE LEVELER COUNTER-CLOCKWISE TO EXTEND THE LEVELER AND CLOCKWISE TO RETRACT IT. ADJUST EACH LEVELER UNTIL EACH SUPPORT LEG IS APPLY EQUAL, UPWARD PRESSURE ON THE SUPPORT SLAT.

Dust frequently with a clean, damp, lint-free cloth. Frequent dusting will remove abrasive build-up which can damage a finish over time. Occasionally use a light application of a high quality furniture polish to enhance the beauty of the finish. Avoid using oily polishes or waxes. Avoid exposing your furniture to strong sunlight. Prolonged exposure to direct sunlight can fade the finish of your furniture. Do not expose your furniture to any liquids. Never allow water to sit on your furniture. Alcohol, nail polish and perfume are also dangerous, as they can dissolve the furniture finish on contact and may require professional repairs.