Grace Pewter Silver Wood King Fabric Upholstered Platform Bed

Attach Headboard Legs: Use Allen bolts, flat washers, and lock washers to attach the headboard legs to the headboard . Attach Side Rails: Connect the side rails to the headboard and footboard using Allen bolts, flat washers, and lock washers. Install Slats and Center Support: Place slat clips on the side rails and center slat clips on the center slat support . Install slats into the clips, ensuring they are evenly spaced. Attach Footboard Legs: Attach the footboard legs to the footboard using the provided hardware. Position and Level the Bed: Place the bed in your desired location. Adjust the levelers under each support leg by turning them counter-clockwise to extend or clockwise to retract until each leg applies equal upward pressure. Additional Notes: If using the bed with an adjustable mattress base, skip steps 3, 4, 5, and 6, and refer to the adjustable mattress base assembly supplement. Ensure to lift the bed when moving to avoid damaging the center support. Readjust levelers after moving. Assembly is complete once all components are securely attached and the bed is level. Maintenance: Regularly check and tighten all bolts and screws. Avoid dragging the bed to prevent damage to the support legs. Readjust levelers as needed to maintain even support.

Avoid exposing your furniture to strong sunlight. Prolonged exposure to direct sunlight can fade the finish of your furniture. To clean spots and stains, please follow instructions per the fabric cleaning code. An annual professional cleaning is recommended to keep your upholstery looking its best.