Evie Sage Green Twin Upholstered Daybed With Pull-Out Twin Trundle

Thank you for purchasing this beautiful daybed. Please first review the enclosed assembly instructions with drawings to ensure all components and hardware are complete.  Make sure your workspace is clean to avoid staining or damaging the fabric.  Read all instructions and study the drawings carefully before starting the assembling process.  Attach Side Rails (C & D) to Arms  (B1 and B2) by pushing the bracket down to fit.  Secure with #3 Bolts using #1 Allen Key. Attach the Back Panel (A) to Arms (B1 and B2) and tighten using #4 Bolts and the #2 Allen Key.  Slide the Center Rail (J) into Arms (B1 and B2) and secure it with #7 CSK screws using a screw driver (not included). Tighten all 4 corners using #1 Allen Key.  Install the Upper Slat Roll (E) onto the Side Rails.  Secure the Upper Slat Roll (E) and Center Rail (J) with #8 CSK screws. The spacing of the slats should provide the desired bed stability. Attach the two Trundle Sides (H) to Trundle Front Panel (G) and then to Trundle Back Panel (I) by pushing the bracket down to fit.  Secure with #3 Bolts using the #1 Allen Key.  Slide the Center Rail (K) into Trundle Sides (H) and secure it using #6 CSK screws and a screwdriver. Attach 6 rollers (#5) to the Bottom Slat Roll (F), following the markings, and secure with #6 CSK screws. Tighten all 4 corners using #1 Allen Key. Secure the Bottom Slat Roll (F) and Trundle Front and Back Panels (G & I) using #8 CSK screws. Assembly is complete.